Home>Products>Bearing Slewing Ring>92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings
92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings
Bearing Slewing Ring
Standard 5 92.35.1802.991.41.1502 Bearing SPECIFICATIONS
With over 10170 full-service stores, 36.513 mm h our 269.875 mm L 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your Fujian Zhenyuan Machinery Parts Co., Ltd. productivity by saving time and your hard-earned dollars.
- Standard 5
92.35.1802.991.41.1502
- 269.875 mm
- 36.513 mm
- 147.637 mm
- 115.888 mm
- LER 35
- 28.575 mm
- 9.79 kN
- 2 x SR-1610
- Fujian Zhenyuan Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings Technology
- 269.875 mm
- 36.513 mm
- 147.637 mm
- 115.888 mm
- LER 35
- 28.575 mm
- 9.79 kN
- 2 x SR-1610
- 50 mm
- 12.9 kN
- EPR 5
- 8
- 2 x 1/2-13 UNC
- LER 23
- 42.862 mm
- 107.73 g
- 1/8 NPT
- 19.05 mm
- 14.2 kN
- 47.625 mm
Standard 5 92.35.1802.991.41.1502 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings specification
No. | Brand | w | M | K | J | S | H | a | N |
60.25.1355.500.11.1503 | Standard 5 | - | - | - | - | - | - | 13 mm | - |
92.35.1900.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
11.50.3567.001.49.1502 | Standard 5 | - | - | - | - | - | 222.25 mm | - | - |
192.25.2500.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
280.30.1400.013 Type 110/1600. | Standard 5 | - | - | - | - | - | - | - | - |
280.30.1375.013 Type 110/1500. | Standard 5 | - | - | - | - | - | - | - | - |
91.40.2395.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.40.2199.300.11.1502 | Standard 5 | - | - | - | - | 0.794 mm | 98.425 mm | - | - |
12.25.1600.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.40.1600.008.19.1503 | Standard 5 | - | - | 9 mm | - | - | - | - | - |
91.25.1502.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
12.40.2950.000.11.1502 | Standard 5 | - | - | - | - | - | - | 18 mm | - |
12.50.3839.001.49.1502 | Standard 5 | - | - | - | - | - | - | 126 mm | - |
12.30.1630.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.45.2654.890.11.1503 | Standard 5 | - | - | - | - | - | - | 28.467 mm | - |
62.30.1400.000.11.1504 | Standard 5 | - | - | - | - | - | 130 mm | - | - |
12.30.1381.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
191.40.2800.990.41.1502 | Standard 5 | - | - | 3 mm | - | - | - | - | - |
12.25.1360.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.28.1400.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.45.2240.891.41.1503 | Standard 5 | - | - | 4.5 mm | - | - | - | - | - |
161.45.2510.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.40.1800.013.19.1503 | Standard 5 | - | - | - | 100 mm | - | - | - | - |
12.40.3300.000.11.1502 | Standard 5 | - | - | - | - | - | 85 mm | - | - |
11.20.1385.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
162.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | B:2.5 mm; d2:133 mm; d1:113 mm; f:10 mm; Mass lock washer:0.094 kg; d:95 mm; M:91.5 mm; |
91.35.1704.991.41.1502 Standard 5 Slewing Ring Bearings | Coefficient of friction µ min.:0.08; D1:165 mm; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; α:124 °; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; d:130 mm; B:60 mm; D:150 mm; Mass bushing:2.65 kg; a:3 mm; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; B1:10 mm; h:131.5 mm; Specific static load factor K0:45 N/mm²; |
92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:3800 rpm; Fillet Radius rb:1.00 mm; B:66.00 mm; Basic Static Radial Load Rating Co:190000 N; D:140.0000 mm; Basic Dynamic Radial Load Rating C:195000 N; d:65.000 mm; Oil Speed Rating n2:4500 rpm; Fillet Radius ra:2.00 mm; |
161.28.1500.890.11.1503 Standard 5 Slewing Ring Bearings | B:46.00 mm; D:540.0000 mm; Basic Static Radial Load Rating Co:405000 N; Accessories:One Shield; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:1100 rpm; Basic Dynamic Radial Load Rating C:255000 N; Sealed Speed Rating n3:0 rpm; d:440.000 mm; Grease Speed Rating Open/Shielded n1:900 rpm; |
11.35.2220.001.41.1503 Standard 5 Slewing Ring Bearings | L:628.65 mm; P120°:127 kN; Cap bolt recommended tightening torque:1220 N·m; P90°:207 kN; H2:69.85 mm; A1:171.45 mm; Ca:95.809 mm; Pa:48.9 kN; Mass pillow block:160 kg; Housing:SSAFS 040 KA; Stabilizing ring:2 x 38151-40; RG:3/4 NPT; Cap bolt, SAE grade:8; da:184.15 mm; R1:115.888 mm; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:878.85 g; H:358.775 mm; End plug (suffix Y):EPR 21; P150°:113 kN; |
191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | rs (min):4 mm; D:310 mm; F:207 mm; d2:170 mm; E:mm; d2 (max):228.8 mm; b1:20 mm; r1s (min):4 mm; Static (Coa):750 kN; Dynamic (Ca):607 kN; Pu:70.340 kN; s:2.9 mm; b:12 mm; B:52 mm; |
281.30.1300.013 Type 110/1500.1 Standard 5 Slewing Ring Bearings | R1:101.6 mm; A2:260.35 mm; Stabilizing ring:SR-28-0; Cap bolt:4 x 3/4-10 UNC; A1:149.225 mm; RG:3/8 NPT; Eye bolt:3/8-16 UNC; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; H:298.45 mm; Max. speed for Taconite seal:625 r/min; da:122.237 mm; P90°:116 kN; P120°:73.8 kN; N1:28.575 mm; S:4.763 mm; Initial grease fill:850.5 g; R2:30.163 mm; Mass pillow block:90.3 kg; |
162.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:88400 N; D:210.0000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:93000 N; Accessories:Two Shields; Fillet Radius ra:2.00 mm; d:150.000 mm; B:28.00 mm; |
162.45.2240.890.11.1503 Standard 5 Slewing Ring Bearings | d:200 mm; with tapered bore:1 000 min-1; B:128 mm; with cylindrical bore:800 min-1; Static (Cor):16.7 mm; rs (min):4 mm; Grease:2760 kN; Oil:247.140 kN; Dynamic (Cr):9 mm; Pu:1710 kN; D:360 mm; |
92.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings | r1 min.:0.6 mm; Da max.:94.7 mm; B:55.55 mm; b1:8 mm; b:9 mm; Specific static load factor K0:300 N/mm²; Sealing solution:Triple-lip seals; da min.:68.3 mm; Lubricant:Regular relubricatio; Specific dynamic load factor K:100 N/mm²; dk:91.186 mm; M:6.5 mm; Basic static load rating C0:1040 kN; D:100.013 mm; α:6 °; C:47.625 mm; Basic dynamic load rating C:345 kN; rb max.:1 mm; Mass plain bearing:1.85 kg; |
62.25.1355.575.11.1403 Standard 5 Slewing Ring Bearings | Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; B1:8 mm; Coefficient of friction µ min.:0.08; a:2.5 mm; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; D:140 mm; α:124 °; B:50 mm; Permissible sliding velocity v min.:0 m/s; d:120 mm; Specific static load factor K0:45 N/mm²; h:121.5 mm; D1:150 mm; Mass bushing:1.95 kg; |
192.50.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:39000 N; B:30.20 mm; Sealed Speed Rating n3:5000 rpm; D:85.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; Fillet Radius ra:1.00 mm; d:45.000 mm; Accessories:One Seal; Grease Speed Rating n1:5000 rpm; Oil Speed Rating n2:6700 rpm; |
91.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | dk:47 mm; d2 max.:84 mm; d:35 mm; l7 min.:40 mm; r1 min.:0.6 mm; B:25 mm; Basic static load rating C0:134 kN; Specific dynamic load factor K:150 N/mm²; d4 ≈:49 mm; Basic dynamic load rating C:120 kN; G:M 36x3; Material constant KM:330; h1:130 mm; l3 min.:60 mm; l5 ≈:25 mm; Mass rod end:1.4 kg; C1 max.:22 mm; w:41 mm; l4 max.:174 mm; α:6 °; |
91.50.2842.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Radial Load Rating-Static SCO:1370 N; Width - Overall B:10.3 mm; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Basic Interchange NDH:8038; Width - Inner Ring B1:9.80 mm; D:22.0000 mm; Basic Radial Load Rating-Dynamic DC:3320 N; Old MRC Bearing Number:38FS1; Basic Interchange FAF:38KL; Fillet Radius ra:0.30 mm; d:8.000 mm; Basic Interchange BCA:-; Width - Outer Ring B0:8.0 mm; Accessories:8000 One Seal; |
62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings | da:50.8 mm; Basic dynamic load rating C:84.5 kN; A:57.15 mm; s:25.4 mm; a:2.381 mm; Mass bearing unit:4.99 kg; J:111.125 mm; B:73.025 mm; A1:75.406 mm; A6:19.05 mm; S:0.794 mm; A5:27.781 mm; Limiting speed:4100 r/min; d2:73.819 mm; N1:14.287 mm; L:139.7 mm; Attachment bolt diameter G:12.7 mm; |
60.25.1455.575.11.1403 Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:1220 N·m; ba:56.356 mm; N1:25.4 mm; Labyrinth ring:2 x LOR 125; P150°:68.1 kN; Da:225.001 mm; Pa:25.4 kN; End plug (suffix Y):EPR 16; Initial grease fill:382.73 g; A1:133.35 mm; Stabilizing ring:2 x SR-0-21; R2:36.513 mm; PG:1/4 NPT; P180°:84.5 kN; R1:79.375 mm; P120°:73.8 kN; Bearing limiting speed:3200 r/min; P60°:189 kN; Appropriate attachment bolt size G:0.875 in; |
92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 92.35.1802.991.41.1502 INTERCHANGE
Bearing Slewing Ring Part series 92.35.1802.991.41.1502 is a potential replacement for these common bearing part numbers:
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
92.35.1802.991.41.1502
Contact Us
- Fujian Zhenyuan Machinery Parts Co., Ltd.
- AddressFengze District, Quanzhou City, Fujian Province
- Phone(Working Time)86-15125978866
- Fax
Standard 5 92.35.1802.991.41.1502 Technical Articles
Can you drive with a bad clutch release bearing? |
How do you change a bearing in a pillow block? |
How long do pilot bearings last? |
Bearing Slewing Ring CATEGORIES
- YUKEN Single Vane Pump PV2R Series
- YUKEN Double Vane Pump
- YUKEN Piston Pump A Series
- YUKEN Solenoid Directional Valve
- YUKEN Pressure Valve
- YUKEN Flow Control Valve
- YUKEN Sandwich Plate Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- DODGE Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Pressure relief valve
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Throttle check valves
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Throttle valves
- M804049 Bearing
- Timken 3782 Bearing
- 08125 Bearing
- Ra012rrb Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings