Home>Products>Bearing Slewing Ring>12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings
12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings
Bearing Slewing Ring
Standard 5 12.30.1800.001.41.1503 Bearing SPECIFICATIONS
100% Fujian Zhenyuan Machinery Parts Co., Ltd. Authentic. 12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings Highest Quality. 3.5 mm r1,2 min. Certified 271.7 mm d1 ≈ Supplier.
- Standard 5
12.30.1800.001.41.1503
- 3.5 mm
- 271.7 mm
- 252 mm
- LM 545800
- 608 kN
- 91.5 kN
- 57.28 mm
- 299 mm
- Fujian Zhenyuan Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings Technology
- 3.5 mm
- 271.7 mm
- 252 mm
- LM 545800
- 608 kN
- 91.5 kN
- 57.28 mm
- 299 mm
- 250 mm
- 1500 r/min
- 314.325 mm
- 10.3 kg
- 53.975 mm
- 1.5
- 1800 r/min
- 304 mm
- 3.3 mm
- 234.848 mm
- 3.3 mm
- 49.212 mm
Standard 5 12.30.1800.001.41.1503 12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings specification
No. | Brand | w | M | K | J | S | H | a | N |
61.40.1600.009.29.1503 | Standard 5 | - | - | - | - | - | - | - | - |
162.36.1900.890.11.1503 | Standard 5 | - | - | 9 mm | - | - | - | - | - |
12.20.1360.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
11.25.1800.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
92.40.2199.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.36.1700.890.11.1503 | Standard 5 | - | - | - | - | - | 161.925 mm | - | - |
62.25.1455.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
11.25.1800.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
62.30.1600.001.21.1504 | Standard 5 | 70 mm | - | - | - | - | - | - | - |
61.40.1800.013.19.1503 | Standard 5 | - | - | - | 100 mm | - | - | - | - |
162.45.2240.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.50.3167.001.49.1502 | Standard 5 | - | - | - | - | - | - | - | - |
91.25.1310.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
192.25.2800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
91.35.2012.990.11.1502 | Standard 5 | - | - | - | - | 4.763 mm | - | - | - |
161.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | 89 mm | - | - |
161.28.1600.890.11.1503 | Standard 5 | - | - | 7.5 mm | - | - | - | - | - |
11.30.2235.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.30.1734.000.11.1503 | Standard 5 | - | - | - | - | - | - | 3 mm | - |
91.25.1310.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1400.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | 20.688 mm | - |
192.50.4000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
12.25.1600.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.40.2915.000.11.1502 | Standard 5 | - | - | 4.5 mm | - | - | - | 162.387 mm | - |
191.25.2000.990.41.1502 | Standard 5 | - | - | - | - | - | - | 364 mm | - |
92.40.2395.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
61.50.2645.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
281.30.1300.013 Type 110/1500.1 Standard 5 Slewing Ring Bearings | R1:101.6 mm; A2:260.35 mm; Stabilizing ring:SR-28-0; Cap bolt:4 x 3/4-10 UNC; A1:149.225 mm; RG:3/8 NPT; Eye bolt:3/8-16 UNC; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; H:298.45 mm; Max. speed for Taconite seal:625 r/min; da:122.237 mm; P90°:116 kN; P120°:73.8 kN; N1:28.575 mm; S:4.763 mm; Initial grease fill:850.5 g; R2:30.163 mm; Mass pillow block:90.3 kg; |
280.30.1400.013 Type 110/1600. Standard 5 Slewing Ring Bearings | Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating n2:24000 rpm; Sealed Speed Rating n3:13000 rpm; Grease Speed Rating n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; Fillet Radius ra:0.64 mm; D:35.0000 mm; Basic Static Radial Load Rating Co:3250 N; B:11.00 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:7800 N; |
162.45.2366.890.11.1503 Standard 5 Slewing Ring Bearings | L:117.475 mm; A6:19.05 mm; J:88.9 mm; N1:14.287 mm; Basic dynamic load rating C:73.8 kN; A5:27.781 mm; Attachment bolt diameter G:12.7 mm; d2:62.706 mm; Limiting speed:5100 r/min; s:25.4 mm; a:2.381 mm; da:36.513 mm; S:0.794 mm; B:69.85 mm; Mass bearing unit:3.27 kg; A:57.15 mm; A1:72.231 mm; |
161.28.1600.891.21.1503 Standard 5 Slewing Ring Bearings | F:511 mm; D1 ≈:638 mm; Mass bearing:450 kg; ra max.:5 mm; da min.:466 mm; b:22.3 mm; rb max.:4 mm; Basic static load rating C0:11800 kN; Calculation factor kr:0.34; r3,4 min.:5 mm; Limiting speed:900 r/min; B:280 mm; Basic dynamic load rating C:5720 kN; Design variant/feature:NNU/W33; Reference speed:700 r/min; da max.:500 mm; r1,2 min.:6 mm; Da max.:694 mm; s max.:10.8 mm; db min.:516 mm; |
161.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | Accessories:Two Shields & Snap-R; d:50.000 mm; Basic Static Radial Load Rating Co:23200 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Sealed Speed Rating n3:4800 rpm; Basic Dynamic Radial Load Rating C:35100 N; Oil Speed Rating n2:8500 rpm; B:20.00 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; D:90.0000 mm; Grease Speed Rating n1:7000 rpm; |
162.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | B:2.5 mm; d2:133 mm; d1:113 mm; f:10 mm; Mass lock washer:0.094 kg; d:95 mm; M:91.5 mm; |
12.35.1960.401.41.1503 Standard 5 Slewing Ring Bearings | Mass pillow block:8.62 kg; Max. speed for Taconite seal:1450 r/min; Cap bolt, SAE grade:8; Housing:SAF 309; Taconite seal (dc shaft position):TER 20; Cap bolt recommended tightening torque:149.1 N·m; Ca:45.796 mm; P90°:20.9 kN; N1:19.05 mm; h:32.544 mm; dc:42.875 mm; Cap bolt:2 x 1/2-13 UNC; J min.:187.325 mm; Taconite seal (db shaft position):TER 28; Initial grease fill:39.69 g; Stabilizing ring:SR-11-9; |
191.32.2500.990.41.1502 Standard 5 Slewing Ring Bearings | d:160 mm; B:25 mm; d3:190 mm; Hydraulic nut:HMV 32 E; B4:27.5 mm; G:M 160x3; B1:93 mm; d1:138.113 mm; Mass adapter sleeve assembly:5.2 kg; |
192.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | B:160 mm; Basic dynamic load rating C:3150 kN; r2 min.:3 mm; ra max.:1 mm; Specific dynamic load factor K:80 N/mm²; b:21 mm; M:8 mm; Basic static load rating C0:4750 kN; D:460 mm; α:3 °; da max.:366 mm; d:340 mm; da min.:348 mm; Specific static load factor K0:120 N/mm²; rb max.:3 mm; Da min.:391 mm; Material constant KM:1055; b1:21 mm; Da max.:446 mm; Design (sliding contact surface combination):Steel/PTFE FRP; |
12.35.2500.001.41.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:15000 rpm; B:15.00 mm; Fillet Radius ra:1.00 mm; d:25.000 mm; Basic Dynamic Radial Load Rating C:16800 N; Basic Static Radial Load Rating Co:10400 N; D:52.0000 mm; |
62.25.1455.500.11.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:5000 N; Fillet Radius ra:0.64 mm; B:12.00 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:11000 rpm; D:42.0000 mm; Grease Speed Rating Open/Shielded n1:17000 rpm; d:20.000 mm; Basic Dynamic Radial Load Rating C:9360 N; |
12.40.3300.001.41.1502 Standard 5 Slewing Ring Bearings | Da min.:60 mm; B:20.638 mm; r1,2 min.:3.5 mm; Fatigue load limit Pu:6.55 kN; D:72.238 mm; da max.:45 mm; db min.:50.5 mm; Limiting speed:9500 r/min; C:15.875 mm; r3,4 min.:1.3 mm; T:20.638 mm; d:38.1 mm; d1 ≈:53.8 mm; Mass bearing:0.36 kg; Da max.:65.5 mm; Ca min.:3 mm; Basic dynamic load rating C:60.3 kN; Basic static load rating C0:60 kN; rb max.:1.3 mm; Db min.:66 mm; |
12.20.1360.000.11.1504 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; Basic Static Radial Load Rating Co:108000 N; B:58.70 mm; D:140.0000 mm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; d:65.000 mm; Basic Dynamic Radial Load Rating C:138000 N; |
92.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | d1:135 mm; B2:93 mm; G1:14 mm; Mass withdrawal sleeve:0.95 kg; B1:83 mm; d:140 mm; G:M 145x2; Hydraulic nut:HMV 29 E; |
91.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | Labyrinth ring:2 x LOR 166; H1:241.3 mm; H2:95.25 mm; da:200.025 mm; Cap bolt:1 1/2-6 UNC; Bearing limiting speed:2000 r/min; RG:1 NPT; Stabilizing ring:SR-44-38; P60°:691 kN; Housing:SSAFS 544; P150°:236 kN; h:79.375 mm; Cap bolt recommended tightening torque:4284.4 N·m; P180°:285 kN; Ca:117.805 mm; Pa:71.2 kN; P90°:414 kN; A2:311.15 mm; Eye bolt:2 x 1/2-13 UNC; P120°:260 kN; |
91.40.2003.990.11.1502 Standard 5 Slewing Ring Bearings | d:30.163 mm; Thread grub screw G2:1/4-28 UNF; J min.:114 mm; J:121 mm; H2:19 mm; s1:22.2 mm; Housing material:Composite for food a; A1:25 mm; Basic dynamic load rating C:19.5 kN; N1:14.5 mm; B4:5 mm; J max.:128 mm; A5:31 mm; Fatigue load limit Pu:0.475 kN; Recommended diameter for attachment bolts, inch G:0.5 in; Limiting speed:3800 r/min; Mass bearing unit:0.52 kg; B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; |
12.30.1800.001.41.1503 Standard 5 Slewing Ring Bearings Video
Standard 5 12.30.1800.001.41.1503 INTERCHANGE
Bearing Slewing Ring Part series 12.30.1800.001.41.1503 is a potential replacement for these common bearing part numbers:
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
12.30.1800.001.41.1503
Contact Us
- Fujian Zhenyuan Machinery Parts Co., Ltd.
- AddressFengze District, Quanzhou City, Fujian Province
- Phone(Working Time)86-15125978866
- Fax
Standard 5 12.30.1800.001.41.1503 Technical Articles
Can you drive with a bad clutch release bearing? |
How do you change a bearing in a pillow block? |
How long do pilot bearings last? |
Bearing Slewing Ring CATEGORIES
- YUKEN Single Vane Pump PV2R Series
- YUKEN Double Vane Pump
- YUKEN Piston Pump A Series
- YUKEN Solenoid Directional Valve
- YUKEN Pressure Valve
- YUKEN Flow Control Valve
- YUKEN Sandwich Plate Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- DODGE Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Pressure relief valve
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Throttle check valves
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Throttle valves
- M804049 Bearing
- Timken 3782 Bearing
- 08125 Bearing
- Ra012rrb Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings