Home>Products>Bearing Slewing Ring>92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings
92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings
Bearing Slewing Ring
Standard 5 92.50.2644.990.41.1502 Bearing SPECIFICATIONS
How do I place an EMERGENCY order for a 92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings that I want to pick up Fujian Zhenyuan Machinery Parts Co., Ltd. at a our 3800 rpm Grease Speed Rating n1 store?
- Standard 5
92.50.2644.990.41.1502
- 3800 rpm
- 1.00 mm
- 66.00 mm
- 190000 N
- 140.0000 mm
- 195000 N
- 65.000 mm
- 4500 rpm
- Fujian Zhenyuan Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings Technology
- 3800 rpm
- 1.00 mm
- 66.00 mm
- 190000 N
- 140.0000 mm
- 195000 N
- 65.000 mm
- 4500 rpm
- 2.00 mm
Standard 5 92.50.2644.990.41.1502 92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings specification
No. | Brand | w | M | K | J | S | H | a | N |
91.35.1802.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.40.2368.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
91.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
162.36.2000.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
161.45.2654.891.41.1503 | Standard 5 | - | - | - | - | 4.763 mm | 360.363 mm | - | - |
280.30.1375.013 Type 110/1500. | Standard 5 | - | - | - | - | - | - | - | - |
61.40.1600.008.19.1503 | Standard 5 | - | - | 9 mm | - | - | - | - | - |
281.30.1300.013 Type 110/1500.1 | Standard 5 | - | - | - | - | 4.763 mm | 298.45 mm | - | - |
62.30.1600.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
161.36.1700.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
282.30.1475.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | - | - |
162.40.2368.890.11.1503 | Standard 5 | - | - | - | - | 4.763 mm | - | - | - |
12.20.1360.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
161.28.1500.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.40.2915.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | 169.863 mm | - | - |
161.40.2000.891.41.1503 | Standard 5 | - | - | - | - | - | 102 mm | - | - |
161.28.1700.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
61.25.1355.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
191.25.2000.990.41.1502 | Standard 5 | - | - | - | - | - | - | 364 mm | - |
12.30.1995.001.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
11.35.2620.000.11.1503 | Standard 5 | - | - | 4.5 mm | - | - | - | - | - |
191.20.1800.990.41.1502 | Standard 5 | - | - | 10 mm | - | - | - | - | - |
161.50.2660.891.41.1503 | Standard 5 | - | - | - | - | 4.763 mm | 222.25 mm | - | - |
12.25.1360.600.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
12.25.1360.601.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
92.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | 126 mm | - | - |
61.50.2645.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
91.50.2644.990.41.1502 | Standard 5 | - | - | - | - | - | 161.925 mm | - | - |
281.30.1375.013 Type 110/1500.1 | Standard 5 | - | - | - | - | - | - | - | - |
12.40.2622.401.41.1502 Standard 5 Slewing Ring Bearings | B:40 mm; d2:50 mm; r2s (min):0.6 mm; Pu:25.850 kN; C:33 mm; rs (min):2.5 mm; T:42.25 mm; a:33 mm; Dynamic (Ca):156 kN; Static (Coa):212 kN; D:110 mm; r1s (min):2 mm; |
162.36.1800.891.41.1503 Standard 5 Slewing Ring Bearings | Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; d:320.000 mm; B:56.00 mm; Basic Dynamic Radial Load Rating C:276000 N; Grease Speed Rating Open/Shielded n1:1200 rpm; D:440.0000 mm; Accessories:One Shield; Sealed Speed Rating n3:750 rpm; Basic Static Radial Load Rating Co:390000 N; |
162.36.1700.890.11.1503 Standard 5 Slewing Ring Bearings | Cap bolt:2 x 1/2-13 UNC; H2:30.163 mm; db:87.313 mm; PosiTrac Plus contact element (db shaft position):B10724-79; da:75 mm; A2:120.65 mm; Labyrinth ring (db shaft position):LOR 79; End plug (suffix Y):EPR 8; PosiTrac Plus contact element (dc shaft position):B10724-44; Appropriate attachment bolt size G:0.625 in; h:28.575 mm; A1:79.375 mm; dc:71.438 mm; H:161.925 mm; Initial grease fill:68.04 g; R2:21.431 mm; |
281.30.1475.013 Type 110/1600.1 Standard 5 Slewing Ring Bearings | A5:26 mm; N:12.3 mm; Housing material:Composite for food a; d:23.812 mm; Recommended tightening torque for grub screw:4 N·m; Basic dynamic load rating C:14 kN; Basic static load rating C0:7.8 kN; Bearing:YAR 205-015-2RF/VE49; A:30 mm; Fatigue load limit Pu:0.335 kN; L:70 mm; Mass bearing unit:0.32 kg; Limiting speed:7000 r/min; B4:5 mm; B:34.1 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
12.35.1960.400.11.1503 Standard 5 Slewing Ring Bearings | J1:69.85 mm; Cap bolt recommended tightening torque:1220 N·m; ba:57.944 mm; Ca:82.804 mm; Max. speed for Taconite seal:900 r/min; Appropriate attachment bolt size G:0.75 in; P150°:66.7 kN; Pa:21.8 kN; H:258.762 mm; H2:53.975 mm; da:88.9 mm; Housing:SAF 620; A2:254 mm; J min.:336.55 mm; R1:79.375 mm; P60°:185 kN; Stabilizing ring:SR-24-20; N1:22.225 mm; P180°:81.4 kN; Taconite seal:TER 103; |
61.40.1400.001.29.1504 Standard 5 Slewing Ring Bearings | Accessories:Two Seals; D:47.6000 mm; d:22.200 mm; Fillet Radius ra:0.79 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; Basic Dynamic Radial Load Rating C:10100 N; Shielded or Sealed B1:12.7 mm; Basic Static Radial Load Rating Co:5850 N; Grease Speed Rating Open/Shielded n1:14000 rpm; Width Plain B:9.5 mm; Sealed Speed Rating n3:9600 rpm; |
92.40.2395.991.41.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:2200 rpm; Shielded or Sealed Co2:475000 N; Fillet Radius rb:1.00 mm; D:320.0000 mm; d:150.000 mm; Width Plain C2:390000 N; Grease Speed Rating n1:1600 rpm; Basic Static Radial Load Rating 15º Co1:585000 N; Basic Dynamic Radial Load Rating 40º C1:410000 N; Fillet Radius ra:3.00 mm; B:130.00 mm; |
11.50.3567.001.49.1502 Standard 5 Slewing Ring Bearings | Ca:69.799 mm; P90°:56.5 kN; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.875 in; Pa:10.5 kN; da:73.025 mm; A1:111.125 mm; H:222.25 mm; H2:44.45 mm; H1:114.3 mm; L:387.35 mm; P120°:35.6 kN; Max. speed for PosiTrac Plus seal:1950 r/min; Mass pillow block:31.4 kg; Housing:SAF 617; ba:38.894 mm; PG:1/4 NPT; Stabilizing ring:2 x SR-1617; Initial grease fill:365.71 g; Cap bolt recommended tightening torque:515.2 N·m; |
11.25.1461.001.21.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:54000 N; Fillet Radius ra:1.00 mm; B:22.00 mm; Basic Dynamic Radial Load Rating C:55900 N; Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:6300 rpm; Fillet Radius rb:0.60 mm; d:80.000 mm; D:125.0000 mm; |
62.30.1400.000.11.1504 Standard 5 Slewing Ring Bearings | Da max.:525 mm; d:460 mm; r1,2 min.:5 mm; Basic static load rating C0:5850 kN; Mass bearing (including seat washer where applicable):120 kg; D:620 mm; Basic dynamic load rating C:923 kN; Minimum load factor A:180; H:130 mm; Fatigue load limit Pu:95 kN; D1 ≈:466 mm; Reference speed:430 r/min; Limiting speed:600 r/min; d1 ≈:614 mm; ra max.:4 mm; da min.:555 mm; |
162.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | B:3 mm; Reference speed:150000 r/min; Mass bearing:0.0006 kg; D:8 mm; Calculation factor kr:0.025; Fatigue load limit Pu:0.004 kN; Basic dynamic load rating C:0.319 kN; Basic static load rating C0:0.09 kN; D1 ≈:6.65 mm; r1,2 min.:0.15 mm; Da max.:6.8 mm; Limiting speed:95000 r/min; d1 ≈:4.35 mm; da min.:3.9 mm; ra max.:0.15 mm; Calculation factor f0:6.1; d:3 mm; |
191.20.1800.990.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor Y2:2.9; 2B:130 mm; ra max.:4 mm; Da max.:303.5 mm; Fatigue load limit Pu:208 kN; rc max.:1.5 mm; Reference speed:1300 r/min; Calculation factor e:0.35; D:320 mm; K:10 mm; d:150 mm; Da min.:273 mm; Basic static load rating C0:2120 kN; b:19 mm; da max.:189 mm; Basic dynamic load rating C:1507 kN; T:144 mm; Calculation factor Y1:1.9; r5 min.:1.5 mm; Mass bearing pair:51.9 kg; |
92.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | d:45 mm; l2 max.:217 mm; B:32 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; l1 min.:92 mm; Basic dynamic load rating C:127 kN; Mass rod end:2.45 kg; Basic static load rating C0:200 kN; dk:60 mm; Material constant KM:330; G:M 42x3; r1 min.:0.6 mm; C1 max.:28 mm; l7 min.:50 mm; d2 max.:104 mm; h:163 mm; |
162.28.1400.890.11.1503 Standard 5 Slewing Ring Bearings | D:110.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; d:60.000 mm; Basic Static Radial Load Rating Co:17000 N; Oil Speed Rating n2:6300 rpm; Grease Speed Rating n1:5300 rpm; Fillet Radius ra:1.50 mm; B:28.00 mm; |
11.40.2619.001.41.1502 Standard 5 Slewing Ring Bearings | a:6.35 mm; A5:38.1 mm; da:68.263 mm; s:31.75 mm; Basic dynamic load rating C:212 kN; Limiting speed:2800 r/min; J:152.4 mm; A:69.85 mm; L:193.675 mm; A6:26.988 mm; N1:20.637 mm; Attachment bolt diameter G:4 x 19.05; S:0.794 mm; Mass bearing unit:12.9 kg; |
161.45.2240.890.11.1503 Standard 5 Slewing Ring Bearings | d:40.000 mm; Basic Dynamic Radial Load Rating C:52700 N; B:36.00 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.00 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:45000 N; Grease Speed Rating n1:5600 rpm; Fillet Radius rb:0.60 mm; |
92.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings Video
Standard 5 92.50.2644.990.41.1502 INTERCHANGE
Bearing Slewing Ring Part series 92.50.2644.990.41.1502 is a potential replacement for these common bearing part numbers:
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
92.50.2644.990.41.1502
Contact Us
- Fujian Zhenyuan Machinery Parts Co., Ltd.
- AddressFengze District, Quanzhou City, Fujian Province
- Phone(Working Time)86-15125978866
- Fax
Standard 5 92.50.2644.990.41.1502 Technical Articles
Can you drive with a bad clutch release bearing? |
How do you change a bearing in a pillow block? |
How long do pilot bearings last? |
Bearing Slewing Ring CATEGORIES
- YUKEN Single Vane Pump PV2R Series
- YUKEN Double Vane Pump
- YUKEN Piston Pump A Series
- YUKEN Solenoid Directional Valve
- YUKEN Pressure Valve
- YUKEN Flow Control Valve
- YUKEN Sandwich Plate Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- DODGE Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Pressure relief valve
- REXROTH Directional poppet valves
- REXROTH Pressure reducing valve
- REXROTH Check valves
- REXROTH Throttle check valves
- REXROTH Throttle check valve
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Throttle valves
- M804049 Bearing
- Timken 3782 Bearing
- 08125 Bearing
- Ra012rrb Bearing
- Super Precision Bearing
- Super Precision Angular Contact Bearings
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Super Precision Bearings